Jump to content
Lowepost

Professional Color Grading Techniques in DaVinci Resolve

xap3.137.214.16

 

This course provides colorists with an in-depth overview of professional color grading techniques and look creation in DaVinci Resolve.

The main concepts discussed in the course are advanced contrast management, balancing techniques and look development. The focus is primarily on higher end color grading, color theory and teaching techniques that took professional colorists years of experience to master.

The course is presented by Kevin P. McAuliffe but is created together with professional colorists that have contributed with insight about their work methods. Kevin uses DaVinci Resolve, but it is taught with the goal of showing techniques that can be used in any color corrector.

The footage used in this course is available for download so that you can easily follow along. In addition, we have included power grades so that you can deeply study the node structures and color grading techniques demonstrated in the course, and a free sample of 35mm film grain from our friends over at Cinegrain.

 

COURSE OVERVIEW

 

LESSON 01: S-CURVE MANIPULATION

The curve is the key component of contrast creation, and in the first lesson we look at the basics of the curve and curve shaping.

LESSON 02: CORRECTIONS IN LOG SPACE AND GAMMA SPACE

We continue to explore how brightness affects the curve in log- and gamma space, and how to manipulate the curve in a log workflow.

LESSON 03: COMPRESSION TECHNIQUES

In this lesson we look at how to disturb the luma vs. distance ratio of the curve with compression techniques to challenge the contrast and create a printed look. This technique is often used as a base to create a painterly feeling with limited dynamic range.

LESSON 04: LOW LUMA COMPRESSION TECHNIQUES 

We dive deeper into compression techniques and how to compress low luminance levels, add speculars and  details with gamma stretching and the log controls.

LESSON 05: PRINTER LIGHTS FUNDAMENTALS

Now that we have a better understanding of contrast management, we look at the fundamentals of printer lights that we will use to balance and create looks later in the course.

LESSON 06: PRINTER LIGHTS WORKFLOW

In this lesson we look at using printer lights in a log workflow and watching the results through our curves.

LESSON 07: BALANCING TECHNIQUES

Now it's time to analyze and match shots with the help of what we have learned about printer lights. We also take a closer look into using the RGB-parade and the vectorscope. We will also discuss some thesis questions related to balancing in general.

LESSON 08: BOUNCING TO CREATE LOOKS

We are ready to create our first desaturated and moody look by bouncing in colors though a defined node structure.

LESSON 09: UNDERSTANDING COLOR HARMONY

Colorists need to understand what makes an image look pleasant to the eye and in this lesson we discuss the important of color harmony. We are building on the look from the previous lesson to create color separation and tweek the colors into an analogous color scheme.

LESSON 10: COLOR CHANNEL MIXING TO CREATE UNIQUE LOOKS

In this lesson we look at how to create a modern and cold look with the help of channel mixing and opacity control.

LESSON 11: GRIT AND TEXTURE

We will go though techniques to bouncing luma controls agains each other to bring out texture, create silver tints to add rawness, clip the blacks and advanced sharpen techniques to bring out grit.

LESSON 12: NODE COLOR MIXING

Node color mixing is a very important skill to master for every colorist, and by combining colors and strengths we will get access to unlimited color combinations that can be used in look development. We will see how our color combinations blends onto the tonal range we have established.

LESSON 13: PIPING A KEY DOWNSTREAM

In this lesson we work with separate streams and color transforms to pipe super clean keys.

LESSON 14: LOCAL EDGE SOFTENING

This lesson is about isolating the local edges in the images and working with them to create a softer image without loosing the overall sharpness.

LESSON 15: CREATING VOLUME IN THE WHITES

We will look at another important compression method for creating volume in the highlights and reduce the sharp thin feeling of digital images. 

LESSON 16: EVENING OUT SKIN TONES

Going through a very popular technique to even out skin tones and take care of imperfections.

LESSON 17: SOFT SATURATED LOOKS

In this lesson we will dial in a soft contrast and create color contrast with varying hue strenghts.

LESSON 18: FILM EMULATIONS AND GRAIN TECHNIQUES

In our final lesson we will create a new look with a Film Emulation LUT, the log controls and add texture with a 35mm fine grain sample (that you will get for free sponsored by Cinegrain). We will look at different techniques to enhance the structure of the grain.

 

 

Become a premium member and get instant access to all the courses and content on Lowepost.

 

Become a Premium Member

 




  • Like 46
  • Thanks 18

User Feedback

Recommended Comments



Hi  there.  I'm still a little confused with the printer light workflow. 

The first time you introduce the concept with an image (Lesson 6), you add a node and play with the contrast to brighten it.  Great.  The second time you do it, you work behind the Alexa Rec709 Lut.  This is wear it gets muddy for me.  That is to say - were I to want to work behind a more aggressive film LUT (such as a film curve), do I adjust and balance my RGB once it has passed through this curve? 

Or - do I do something like you've done in lesson 6 - where I would first add a contrast node, find the pivot and add adjust brightness > balance > delete contrast node and then feed this now 'balanced' signal into my film curve LUT.  

I hope that makes sense 🙄

Link to comment
Share on other sites

On 3/16/2020 at 3:22 PM, Tom Early said:

Lesson 15 at 1:05 - the entirety of the 0-100 luminance range is actually mapped between the values of 50 and 75 in the luminance qualifier

That's true and the reason we put the line up at about 60 IRE and not higher. The other explanation was to point out that the luminance ranges from black on the left side to white on the right side.

Link to comment
Share on other sites

 

4 hours ago, NF Harvey said:

I to want to work behind a more aggressive film LUT (such as a film curve), do I adjust and balance my RGB once it has passed through this curve? 

You should balance prior to the LUT (or custom curve) and watch the result through the LUT (or custom curve).
 

4 hours ago, NF Harvey said:

Or - do I do something like you've done in lesson 6 - where I would first add a contrast node, find the pivot and add adjust brightness > balance > delete contrast node and then feed this now 'balanced' signal into my film curve LUT

No. You should balance prior to the curve and judge the balance by watching the corrections through the curve.

  • Thanks 1
Link to comment
Share on other sites

Cine Grain is a scan from original film 8mm through to 35mm & is used as an overlay, so not a lot of tweaking. Film Grain OFX plugin generates new grain so every frame should be different. Plus you change all aspects & behaviour of the grain even going into the tonal ranges, shadows, midtones & highlights & individually adjusting them. FilmConvert plugin also has a very good grain generator similar to Resolve.

As for aesthetics, I personally think the grain should be more of a feel rather than visually noticeable giving a bit of randomness to the perfect digital frame.

If you have a less powerful machine Cine Grain might be the one to use as any OFX plugin will be a bit more of a drain on your computer.

Hope that helps.

Phil

  • Like 2
Link to comment
Share on other sites

Amazing lessons. Specially the "node color mixing" chapter opens a world of possibilities of much a much controlled workflow. Only because of this single tutorial it has been well worth following the course. The pace of Mr. P. McAuliffe is slow enough to really understand all the concepts he is teaching. There is nothing worse than a tutorial where the ponent races through the lesson. What I like so much in Lowepost is that all the courses are not only enlightening to the audience but are also presented well organized and easy to follow.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

On 4/18/2020 at 4:26 AM, Phil O'Dea said:

Cine Grain is a scan from original film 8mm through to 35mm & is used as an overlay, so not a lot of tweaking. Film Grain OFX plugin generates new grain so every frame should be different. Plus you change all aspects & behaviour of the grain even going into the tonal ranges, shadows, midtones & highlights & individually adjusting them. FilmConvert plugin also has a very good grain generator similar to Resolve.

As for aesthetics, I personally think the grain should be more of a feel rather than visually noticeable giving a bit of randomness to the perfect digital frame.

If you have a less powerful machine Cine Grain might be the one to use as any OFX plugin will be a bit more of a drain on your computer.

Hope that helps.

Phil

Thanks for this! I love Resolve's built-in grain so I prefer using this! :) 

Link to comment
Share on other sites

1 hour ago, Manoj said:

I'm looking to get this course. Any practicing clips attached to this lessons?

Thankyou

Yes, all the shots are included. Also a set of power grades and a grain sample. 

Link to comment
Share on other sites




Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...