Gasa E Kenny June 16, 2019 Share June 16, 2019 Hi guys, first post here so sorry if this is not the right way to do it. I just wanted to know if they is a way to default to Grid and Orthogonal Pipes so I don't have to enable them every time I start a project. Thanks Link to comment Share on other sites More sharing options...
Lee Lanier July 6, 2019 Share July 6, 2019 On 6/16/2019 at 11:46 AM, Gasa E Kenny said: Hi guys, first post here so sorry if this is not the right way to do it. I just wanted to know if they is a way to default to Grid and Orthogonal Pipes so I don't have to enable them every time I start a project. Thanks If you go to Fusion > Fusion Settings > Flow and turn on Arrange To Grid and set Pipe Style to Orthogonal, the grid snap and orthogonal pipes are activated for any new project. If set this way, it will also affect old projects you may open (although this seems inconsistent). Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.