Tom Evans April 10, 2018 Share April 10, 2018 Now that Fusion is integrated into Davinci Resolve it would be great to see some basic tutorials to get started? 1 Link to comment Share on other sites More sharing options...
Bruno Mansi April 11, 2018 Share April 11, 2018 There's always been a bunch of tutorials on YouTube. A lot of these were for very much earlier versions of Fusion - even going back to the days when it was owned by Eyeon, so they may not be terribly useful. See the Vimeo channel... https://vimeo.com/channels/fusion As far as the latest (standalone) version is concerned, there's very basic ones like these... https://www.youtube.com/watch?v=7VrCoB7mbzw&t=534s https://www.youtube.com/watch?v=iNOVvXBPuEM The version that's included in Resolve is laid out slightly differently. There's a Blackmagic video that takes the Fusion node for a spin, but it gets into advanced effects such as 3D and particles pretty quickly... https://www.youtube.com/watch?v=4i-Js1UA1OY Jonny Elwyn has a whole section on Fusion on his website... https://jonnyelwyn.co.uk/film-and-video-editing/getting-started-with-fusion-9/ You can also try sites like Creative Cow and Premiumbeat. Moviola (which has recently become free to everyone) has some stuff on Resolve for those used to working in Nuke. 1 1 Link to comment Share on other sites More sharing options...
Nicolas Hanson April 11, 2018 Share April 11, 2018 I downloaded DR15 today but the Fusion part hangs all the time. Is it stable on your systems? Link to comment Share on other sites More sharing options...
Bruno Mansi April 11, 2018 Share April 11, 2018 I've just been having a play with Resolve 15 on my laptop and on the whole it's been OK. A couple of crashes, but I could never reproduce it a second time around. Fusion works on my setup, albeit very slowly - I'm only getting playback of a few frames a second, and that's before I've added any effects. I'm not expecting much performance on a laptop, but it seems slower than I remembered using Fusion 9 standalone. I don't see the proxy setting icon like there used to be in Fusion 9, so I'm not sure if it's using the proxy setting from Resolve. Nicolas, your problem might be to do with your graphic chip or driver - I've got a mobile Nvidia chip on my laptop (M4000) and it seems to work with this setup. I suggest you try forcing Fusion to work with your CPU only. You can change this by going to the System Configuration settings and ticking the box that says 'Always run Fusion on CPU' 1 Link to comment Share on other sites More sharing options...
Tom Evans April 12, 2018 Author Share April 12, 2018 Thank you for the detailed overview Bruno, I will start to dig into every aspect of Fusion now that it is so accessible. It's unstable on my system as well, it might be more solid on a Mac though... Link to comment Share on other sites More sharing options...
Aaron Rosapepe June 1, 2018 Share June 1, 2018 Looks like there's a recent course on FXPHD. I enjoyed their DR training so may be worth a look.https://www.fxphd.com/details/564/ 1 Link to comment Share on other sites More sharing options...
Tom Evans October 19, 2018 Author Share October 19, 2018 Looks like Lowepost is pushing Fusion tutorials hard now, thank you! 2 Link to comment Share on other sites More sharing options...
Kat Caverly December 14, 2018 Share December 14, 2018 I had been looking for Fusion tutorials since Resolve 15 was released, but only today did I discover Lowepost. I am having a ball doing the tutorials. Kevin McAuliff's Fundamentals training makes Fusion look like a lot of fun! Thanks Kevin. 1 Link to comment Share on other sites More sharing options...
Lowepost December 14, 2018 Share December 14, 2018 Hi Kat. Thank you for your kind words! The Fusion Essentials series has been very well-received by our members so we have started to record a full "DaVinci Resolve Fusion for Finishing Artists"-series that will follow up where Kevin left. We can't wait to tell you more about it. And... We just wrapped up a new course about beauty retouching that will be available soon! 2 Link to comment Share on other sites More sharing options...
Stefano Barozzi May 7, 2019 Share May 7, 2019 Hello anybody knows how to random rotate the letter of a 3D text in fusion? cheers Link to comment Share on other sites More sharing options...
Ron Schieffer October 11, 2019 Share October 11, 2019 On 12/14/2018 at 9:38 PM, Lowepost said: Hi Kat. Thank you for your kind words! The Fusion Essentials series has been very well-received by our members so we have started to record a full "DaVinci Resolve Fusion for Finishing Artists"-series that will follow up where Kevin left. We can't wait to tell you more about it. And... We just wrapped up a new course about beauty retouching that will be available soon! Is there already a release date in your mind? thanks. Link to comment Share on other sites More sharing options...
Lowepost October 23, 2019 Share October 23, 2019 On 10/11/2019 at 4:28 PM, Ron Schieffer said: Is there already a release date in your mind? thanks. Hi Ron! We renamed the finishing course to "Introduction to visual effects in DaVinci Resolve Fusion and the beauty course is now in the course list. Link to comment Share on other sites More sharing options...
Cristian Baitg April 4, 2020 Share April 4, 2020 I also agree that a Basic Fusion tutorial for those that have not a clue about motion graphics would be great. Fusion is the Toughest part by par inside Davinci Resolve. There are hundreds of Davinci Resolve Color grading that repeat themselves adnauseum but great Fusion tutorials can be counted with 1 hand. Please many people would be very grateful if you focus more into this overwhelming piece of software. It is tough,complex,convoluted not intuitive at all. A step by step guide from the basics would be really helpful. 1 Link to comment Share on other sites More sharing options...
Luca Di Gioacchino April 4, 2020 Share April 4, 2020 Check out Vito LaManna's Confusion channel on Vimeo and/or Patreon. He is the Andrew Kramer of Fusion. One of the best. Highly informative and fun. Link to comment Share on other sites More sharing options...
Luca Di Gioacchino April 4, 2020 Share April 4, 2020 Fusion may seem daunting to learn at first but once you wrap your head around nodes (especially if you are coming from AE, like i did), everything falls into place. Once you get that 'a-ha' moment, you'll never look back. Link to comment Share on other sites More sharing options...
Cristian Baitg April 4, 2020 Share April 4, 2020 Thank you. I will visit the channel on Vimeo you mentioned. As I am starting I need basic tutorials, very simple stuff so that a-ha moment gets me because every video I see on youtube even for simple actions my mind explodes.......This days of confinement I hope I can get a grip of this beast. Link to comment Share on other sites More sharing options...
Luca Di Gioacchino April 5, 2020 Share April 5, 2020 https://www.con-fusion.net/home Link to comment Share on other sites More sharing options...
Luca Di Gioacchino April 5, 2020 Share April 5, 2020 I also find this guy's tutorials very useful. https://www.youtube.com/channel/UC7c46tWEb2grLQ95OGLxBJQ 1 Link to comment Share on other sites More sharing options...
Cristian Baitg April 5, 2020 Share April 5, 2020 Thank you. I finally found an amazing course for free and I have to say that for the first time I am following along quite well. This free Fusion inside Davinci Resolve 16 is a must for all those people that have no previous knowledge of Fusion. VFXStudy https://vfxstudy.com/tutorials/course/rfb/ Link to comment Share on other sites More sharing options...
Abby Bader April 5, 2020 Share April 5, 2020 Cristian, have you watched "Introduction to visual effects in Fusion* and "Fusion Fundamentals" on Lowepost? 1 Link to comment Share on other sites More sharing options...
Cristian Baitg April 5, 2020 Share April 5, 2020 I missed those as I could not find the "Fusion Fundamentals" in the Lowepost library and the "Introduction to visual effects in Fusion" was to advanced for me as I could not make my mind around how the whole node organization worked from the start especially coming from Photoshop that works with layers. Now that I have followed the Blackmagic official Fusion in Davinci 45 minutes video and that of VFX I understand more how to organize the node structure. I am sure that I can jump now into the "Introduction to visual effects in Fusion" one. Thank you very much for pointing me to those two courses. Link to comment Share on other sites More sharing options...
Thomas Singh April 5, 2020 Share April 5, 2020 Those are two really great courses and the basics are all covered very well, but I agree they aren't very easy to find. Maybe create a flight path or organize the Fusion courses in its own category? It's easy to get lost when the library is growing. 1 Link to comment Share on other sites More sharing options...
Cristian Baitg April 7, 2020 Share April 7, 2020 (edited) Just started the Fusion Fundamentals. That is exactly what I was looking for. Very well explained and at the right pac (slow) for beginners. Really wish I could have discovered sooner. Double thumbs up for the teacher. There are so many tutorials in youtube where people run to fast for non native english speakers and explain too many concepts at once that it is really great to be able to have this one to slowly bake in all the instrument this software has to offer. Edited April 7, 2020 by Cristian Baitg 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.